LMT Modular Ambidextrous Rifle System vs SIG Sauer P226

Lewis Machine & Tool Company^[source]LMT Modular Ambidextrous Rifle System · Designer

Lewis Machine & Tool Company^[source]LMT Modular Ambidextrous Rifle System · Manufacturer

SIG Sauer^[source]

5.56×45mm NATO 7.62×51mm NATO 6.5mm Creedmoor^[source]LMT Modular Ambidextrous Rifle System · Cartridge

The MARS-L (light) assault rifle variants are chambered for the 5.56×45mm NATO intermediate cartridge , and the MARS-H (heavy) battle rifle and designated marksman rifle variants for the 7.62×51mm NATO , 6.5 mm Creedmoor or similar fully powered cartridges .^[source]Design · explicit MARS-L/MARS-H cartridge scope

MARS-H based designated marksman variant, chambered in 6.5 mm Creedmoor .^[source]L129A2 · explicit MARS-L/MARS-H cartridge scope

Swiss MARS-H-based designated marksman rifle chambered in 7.62×51mm NATO.^[source]7.62mm Zf Stgw 20 · explicit MARS-L/MARS-H cartridge scope

LMT's MRGG-A is a member of its Modular Ambidextrous Rifle System-Heavy (MARS-H) family, which are commonly described as AR-10-style rifles, but is chambered to fire the 6.5mm Creedmoor round.^[source]MK24 Mid-Range Gas Gun-Assault · explicit MARS-L/MARS-H cartridge scope

9×19mm Parabellum 7.65mm Parabellum 9×21mm IMI .357 SIG .40 S&W .22 Long Rifle (Classic 22 model only)^[source]

Gas-operated , rotating bolt (internal piston, not direct impingement ) or Short-stroke piston^[source]LMT Modular Ambidextrous Rifle System · Action

Mechanically locked, recoil operated ( DA/SA , DAK (double action Kellerman), or DAO ), or SAO^[source]

5.56×45mm NATO : 30-round detachable box magazine 7.62×51mm NATO 20-round detachable box magazine^[source]LMT Modular Ambidextrous Rifle System · Feed system

10-, 12-, 13-, or 15-round magazine (.40 S&W, .357 SIG) 10-, 15-, 17-, 18-, or 20-round magazine (9×19mm Parabellum, 9×21mm IMI) 10-round polymer magazine (Classic 22 only)^[source]

See Users^[source]

1980–1983^[source]

1984–present^[source]

See Variants^[source]

Iron sights^[source]

full-sized service pistol made^[source]

The SIG Sauer P226 is a full-sized service pistol made by SIG Sauer . This model is available in four chamberings: the 9×19mm Parabellum , .40 S&W , .357 SIG , or .22 Long Rifle . It has the same mechanism of operation as the SIG Sauer P220 , but is developed to use higher capacity, double stack magazines in place of the single stack magazines of the P220.^[source]SIG Sauer P226 · Lead; only the objects and conditions stated in this passage

The variants consist of the NP22, NP22A, NP34, NP56 and the NP58. The SDM XM9 is a variant of the NP22 chambered in 9×21mm for countries that don't allow any pistol calibers that are only for the military and police. The LP3 and LP4 are versions of the NP22 and NP34 with manual safeties on the slide. The NP762 is chambered to fire 7.62×25mm bullets, which were exported in 2019. They were first made by Xinhua in 1999 and were known then as the NP2000 for potential contracts in China for the PLA and various law enforcement agencies.^[source]SIG Sauer P226 · Manufacture; only the objects and conditions stated in this passage

Introduced at the 2010 SHOT Show , the P226 E2 at the time was a significant update to the P226 line. 'E2' (pronounced 'E-squared'), or otherwise known as "Enhanced Ergonomics", is SIG Sauer's attempt to make the large frame gun more ergonomic for persons with small and medium-sized hands. A reduced grip size and reduced reach trigger bring the trigger face back more than 13 mm (0.5 in), thus potentially allowing better trigger manipulation and control for a greater number of shooters. Other standard features include the Short Reset Trigger, aggressive grip finish texture, and a new wrap-around, one-piece grip panel configuration. The gun was discontinued from the P226 model lineup at the end of 2010 but the E2-style grip system has been adopted on and carried over to other P226 variants.^[source]SIG Sauer P226 · Variants / P226 E2; only the objects and conditions stated in this passage

A compact version of the P226, the P228 was introduced in 1988. It is in use with various law enforcement agencies and also with the United States Armed Forces , where it is designated as the M11 . The P228 has a shorter slide and barrel than the P226. Unlike the P226, the P228 is available only in 9×19mm Parabellum with a 13-round magazine, but can also use P226 15- or 20-round magazines. Aftermarket magazines extend the capacity of the P228 to 15 rounds.^[source]SIG Sauer P226 · Variants / P228 (M11); only the objects and conditions stated in this passage

From a distance, the P228 can be differentiated from the P226 by comparing the trigger guards (the P228's is curved, while the P226's is slightly hooked) and the barrel and slide lengths (the P228's barrel 99 mm (3.9 in), thus having a corresponding shorter slide). Also in a side-by-side comparison the P228 would appear slightly shorter (15 mm (0.59 in) shorter) than the P226. The larger capacity P226 magazine can also be employed in the P228 although it extends from the base of the grip. Civilian sales of the P228 were discontinued with the introduction of 9mm chambering in the P229 but were recently reintroduced in limited quantities to civilians with an accessory rail and hooked trigger guard, designated the P228R.^[source]SIG Sauer P226 · Variants / P228 (M11); only the objects and conditions stated in this passage

The P229 is nearly identical to the P228, however its slide is made from milled stainless steel (versus the P228's folded carbon steel slide) and is available in 9mm , .40 S&W , and .357 SIG . In the summer of 2012, SIG Sauer announced they were releasing the M11A1, which is essentially the milled-slide P229 chambered in 9mm with P228-labeled grips, a short reset trigger, SIGLITE tritium night sights , Mec-Gar 15-round magazines, and a military style smart tag and serial number. Later in 2012, U.S. Air Force M11b versions of the P228 were released for civilian sale. The M11 is to be replaced in the Army and Air Force through the Modular Handgun System program. On January 19, 2017, it was announced that the SIG Sauer P320 Compact (M18) had been selected to replace the M11 as the U.S military service pistol. One factor in winning the Modular Handgun System competition was the ability to employ 9mm Parabellum, .357 Sig or .40 S&W cartridges within the same basic frame.^[source]SIG Sauer P226 · Variants / P228 (M11); only the objects and conditions stated in this passage

A standard weight recoil spring for the P229 is 71 N (16 lb f ). A spring weight of 89 N (20 lb f ) or higher would have been required if a stamped slide was used for the .40 S&W or .357 SIG chamberings. The SAAMI maximum chamber pressures of 9mm, 9mm +P, .40 S&W, and .357 SIG are as follows: 240 MPa (35,000 psi); 265 MPa (38,500 psi); 240 MPa (35,000 psi); and 280 MPa (40,000 psi). The slide on the P226 was redesigned in a similar fashion, and civilian sales of the P228 were discontinued in early 2005 due to declining sales and the advent of the P229 in 9mm. The P226 and P229 are both available with optional accessory rails and optional forged stainless steel frames.^[source]SIG Sauer P226 · Variants / P229; only the objects and conditions stated in this passage

The P229 can be chambered in .22 LR, 9mm , .40 S&W or .357 SIG .^[source]SIG Sauer P226 · Variants / P229; only the objects and conditions stated in this passage

Conversion barrels also allow a P229 or P226 to change between a .40 S&W/.357 SIG to a 9mm caliber.^[source]SIG Sauer P226 · Variants / P229; only the objects and conditions stated in this passage

The 9mm model (both railed and non-railed) can be converted to .22 LR, but in the past its receivers were not designed to provide the space needed for handling the larger rounds of .357 SIG and .40 S&W.^[source]SIG Sauer P226 · Variants / P229; only the objects and conditions stated in this passage

As SIG Sauer has slowly begun adopting the E2-style grip system across the P229 model range in 2011—a move similar to what is also happening to the larger P226—they have also begun using the .357 SIG/.40 S&W spec frame dimensions for their factory 9mm P229s, presumably to streamline the number of variations in parts needed to be kept in inventory.^[source]SIG Sauer P226 · Variants / P229; only the objects and conditions stated in this passage

Although the manufacturer has announced that older-configuration magazines will continue to operate in the new receiver configuration, SIG Sauer has nonetheless revised new P229 9mm factory magazines to a design that is specific to the resized magazine well of the newly reconfigured receiver/frame.^[source]SIG Sauer P226 · Variants / P229; only the objects and conditions stated in this passage

The P224 is a subcompact variant of the series. It has a barrel length of 3.5 inches (8.9 cm) and an unloaded weight of 29 ounces (820 g). It has a 12-round capacity when chambered in 9mm; it is also available in .357 SIG and .40 S&W. The P224 was introduced in 2012 as double-action only (DAO); it was reintroduced in 2013 as double action / single action (DA/SA) with a decocking lever . The P224 was discontinued in 2016.^[source]SIG Sauer P226 · Variants / P224; only the objects and conditions stated in this passage

• Reported operator · Estonia
• Reported operator · Lebanon
• Reported operator · New Zealand
• Reported operator · Switzerland
• Reported operator · United Kingdom
• Reported operator · United States