Credit
A proietti · CC BY-SA 4.0 · Resized · CC BY-SA 4.0 · Source ↗ · Modified
FORCETALLY
Loading the evidence…
Preparing your view.
Preparing your view.
Measured figures
Configuration
| Specification | Husky VMMD | KMT 5 M |
|---|---|---|
| Type | MRAP[source] | tank mounted mechanical mine clearing device[source] |
| Place of origin | South Africa[source] | — |
| In service | 1970s–present[source] | — |
| Manufacturer | DCD Group Critical Solutions International[source] | — |
| Produced | 1970s–present[source] | — |
| Engine | Mercedes-Benz OM906LA 6.4L turbo diesel |
KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Cleared lane width · x 2
Single source0.81 m x 2[source]KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Cleared lane width
curb weight
Single sourcegross weight
Single source18,408 to 19,841 lb (8,350 to 9,000 kg) curb weight, 20,282 to 25,022 lb (9,200 to 11,350 kg) gross weight[source]
KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Weight · m
Single sourcem
Single source2 (G2 variant)
Single source1 2 (G2 variant)[source]
Maximum; top speed
Single source45 mph (72 km/h) top speed[source]
Maximum; KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Operating speed · Speed
Single source6–12 km/h[source]KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Operating speed
Bars compare reported quantities only. A larger figure does not make a system better; configurations and test conditions differ.
| — |
| Transmission | 5-speed automatic[source] | — |
|---|
| National origin | — | Soviet Union[source] |
|---|
| Introduction | — | 1960s[source] |
|---|
| Mounting compatibility | — | T-54/55 , T-62 and T-64 tanks[source]Supported tanks only; no tank dimensions, crews or engine power inherited |
|---|
| Clearing mechanism | — | outer roller and an inner plow[source] |
|---|
| Depth of clearance | — | 0.1 m[source]KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Depth of clearance |
|---|
| Install time | — | 30-45 min[source]KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Install time |
|---|
| Removal time | — | 8-13 min[source]KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Removal time |
|---|