Credit
Manniman2 · CC BY-SA 4.0 · Resized · CC BY-SA 4.0 · Source ↗ · Modified
FORCETALLY
Loading the evidence…
Preparing your view.
Preparing your view.
Measured figures
with fuse
Single source107 mm (4.2 in) (with fuse)[source]
Height
Single sourceConfiguration
| Specification | DM51 hand grenade | FMK-1 mine |
|---|---|---|
| Type | Hand grenade[source] | anti-personnel blast mine[source] |
| Place of origin | West Germany[source] | — |
| In service | 1978–…[source] | — |
| Used by | See Users[source] | — |
| Wars | Russo-Ukrainian War[source] | — |
| Designer | Diehl Defence |
SourceFMK1 configuration; operatingpressure alternatives remain separately qualified · Height
Single source40 mm[source]
40 mm[source]SourceFMK1 configuration; operatingpressure alternatives remain separately qualified
with fragmentation jacket
Single sourcewith safety lever
Single source57 mm (2.2 in) (with fragmentation jacket) 66 mm (2.6 in) (with safety lever)[source]
Diameter
Single sourceSourceFMK1 configuration; operatingpressure alternatives remain separately qualified · Diameter
Single sourcewith fuse
Single source430 g (15 oz) (with fuse )[source]
Filling weight
Single source60 g (2.1 oz)[source]
of a TNT / RDX mix
Single sourceSourceFMK1 configuration; operatingpressure alternatives remain separately qualified · of a TNT / RDX mix
Single source152 g of a TNT / RDX mix[source]
152 g of a TNT / RDX mix[source]SourceFMK1 configuration; operatingpressure alternatives remain separately qualified
Bars compare reported quantities only. A larger figure does not make a system better; configurations and test conditions differ.
| — |
| Designed | 1970s[source] | — |
|---|
| Manufacturer | Diehl Defence[source] | — |
|---|
| Unit cost | €33.60 (1996)[source] | — |
|---|
| Produced | 1970s–…[source] | — |
|---|
| Variants | See Variants[source] | — |
|---|
| Filling | PETN[source] | — |
|---|
| Detonation mechanism | DM82 delay fuse[source] | — |
|---|
| Fuze configuration | — | when fitted with a stiffened pressure plate, is also used as the fuze for the FMK-3 and FMK-5 anti-tank mines[source]Distinct stiffened-pressure-plate fuze configuration, not live APmine stock |
|---|
| Material | — | circular plastic body[source] |
|---|
| Current Argentine retained configuration | — | the only stocks of the mine that have been retained have the thick pressure cap welded on[source]Treaty-related retained fuze configuration; no unsourced live anti-personnel stock assumption |
|---|
| Operating pressure | — | 5 kg (without stud fitted) 15 to 50 kg (with stud fitted) 300 kg (with stud and stiff pressure plate)[source]SourceFMK1 configuration; operatingpressure alternatives remain separately qualified |
|---|
| Country of origin | — | Argentina[source]Inventory Origin column; table 9, row 32, cell 3; revision 1374043591; retrieved 2026-09-30 |
|---|
| Reported operators |
| — |
|---|