
Loading the evidence…
Preparing your view.
Preparing your view.

Measured figures
Configuration
| Specification | Challenger Armoured Repair and Recovery Vehicle | KMT 5 M |
|---|---|---|
| Type | Armoured Recovery Vehicle[source] | tank mounted mechanical mine clearing device[source] |
| Place of origin | United Kingdom[source] | — |
| In service | 1988 - present[source] | — |
| Used by | British Army Royal Army of Oman[source] | — |
| Wars | First Gulf War Iraq War War in Afghanistan[source] |
Width
Single source3.62 m (11.9 ft)[source]
KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Cleared lane width · x 2
Single source0.81 m x 2[source]KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Cleared lane width
Mass
Single source61.2 t (60.2 long tons; 67.5 short tons)[source]
Maximum; Maximum speed
Single source59.2 km/h (36.8 mph)[source]
Maximum; KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Operating speed · Speed
Single source6–12 km/h[source]KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Operating speed
Operational; Operational range
Single source500 km (310 mi)[source]
Perkins-Condor CV12-5C/6C
Single sourcePerkins-Condor CV12-5C/6C 1200 bhp[source]
Bars compare reported quantities only. A larger figure does not make a system better; configurations and test conditions differ.
| — |
| Designer | Vickers Defence[source] | — |
|---|
| Designed | 1985[source] | — |
|---|
| Produced | 1988-1993[source] | — |
|---|
| No. built | 84[source] | — |
|---|
| Passengers | — |
|---|
| Armour | Rolled homogeneous armour and applique armour[source] | — |
|---|
| Main armament | None[source] | — |
|---|
| Secondary armament | 1 x 7.62mm GPMG Smoke dischargers[source] | — |
|---|
| Transmission | David Brown TN54E[source] | — |
|---|
| Manufacturer | Vickers plc, Rheinmetall BAE Systems Land[source] | — |
|---|
| National origin | — | Soviet Union[source] |
|---|
| Introduction | — | 1960s[source] |
|---|
| Mounting compatibility | — | T-54/55 , T-62 and T-64 tanks[source]Supported tanks only; no tank dimensions, crews or engine power inherited |
|---|
| Clearing mechanism | — | outer roller and an inner plow[source] |
|---|
| Depth of clearance | — | 0.1 m[source]KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Depth of clearance |
|---|
| Install time | — | 30-45 min[source]KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Install time |
|---|
| Removal time | — | 8-13 min[source]KMT5M attachment · cleared lane width is per strip, two strips stated, not chassis width · Removal time |
|---|