FORCETALLY
Loading the evidence…
Preparing your view.
Preparing your view.
At a glance
Measured figures
214ST · Length
Single source49 ft 4 in (15.03 m)[source]
F28F · Length
Single sourceConfiguration
| Specification | Bell 214ST | Enstrom F-28 |
|---|---|---|
| Crew | 1 or 2[source] | one[source] |
| Type | Medium-lift helicopter[source] | Light helicopter[source] |
| National origin | United States[source] | — |
| Manufacturer | Bell Helicopter[source] | Enstrom Helicopter Corporation[source] |
| Status |
29 ft 3 in (8.92 m)[source]
214ST · Wingspan
Single source52 ft 0 in (15.85 m)[source]
F28F · Main rotor diameter
Single source32 ft 0 in (9.75 m)[source]
214ST · 2 × General Electric CT7-2A turboshaft , 1,625 shp ( ) each
Single source2 × General Electric CT7-2A turboshaft , 1,625 shp (1,215 kW) each[source]
F28F · 1 × Lycoming HIO-360-F1AD four-cylinder, direct-drive, horizontally opposed, air-cooled, piston aircraft engine
Single source1 × Lycoming HIO-360-F1AD four-cylinder, direct-drive, horizontally opposed, air-cooled, piston aircraft engine, 225 hp (168 kW)[source]
214ST · Wing area
Single source2,124 sq ft (107.3 m 2 )[source]
F28F · Endurance
Single source3 hr 30 min[source]
Bars compare reported quantities only. A larger figure does not make a system better; configurations and test conditions differ.
Production completed[source]
| — |
| Primary users | Peruvian Air Force Royal Brunei Air Force Royal Thai Navy Iraqi Air Force (historical)[source] | — |
|---|
| Number built | 96[source] | — |
|---|
| Manufactured | 1979–1993[source] | 1965-present[source] |
|---|
| Introduction date | 1982[source] | 1965[source] |
|---|
| First flight | 21 July 1979[source] | — |
|---|
| Developed from | Bell 214[source] | — |
|---|
| Capacity | Internal: 16 or 17 passengers or equivalent cargo; External: 8,000 lb (3,630 kg) sling load[source] | two passengers[source] |
|---|
| Variants | — | Enstrom TH180 Spitfire Mark I[source] |
|---|
| Developed into | — | Enstrom 480[source] |
|---|
| Main rotor area | — | 804 sq ft (74.7 m 2 ) NACA 0013.5[source] |
|---|
| Country of origin | — | Vereinigte Staaten[source]Country of design · Entwurfsland |
|---|