Loading the evidence…
Preparing your view.
Preparing your view.
Measured figures
Configuration
| Specification | 8A4-class ROUV | ULAQ |
|---|---|---|
| Type | remotely operated underwater vehicle (ROUV)[source] | Rigid boat[source] |
| Role | oil platform service to salvage and rescue missions[source] | — |
| Designer | the 702nd Research Institute of the China Shipbuilding Industry Corporation (CSIC), the Shipbuilding Engineering Institute of Harbin Engineering University (HEU), and the Institute of Underwater Engineering of Shanghai Jiao Tong University (SHJTU)[source] | — |
| General designer | Xu Huangnan (徐芑南)[source] | — |
| Manipulator system | two manipulators that could operate around half a dozen tools[source] |
Maximum; Speed
Single source35 kn (65 km/h; 40 mph)[source]
Bars compare reported quantities only. A larger figure does not make a system better; configurations and test conditions differ.
| — |
| Tether management | Tether Management System (TMS)[source]Original full-performance TMS configuration; later units had TMS removed | — |
|---|
| Maximum operating depth | up to 600 meters[source]First 8A4 unit sea trials 1993 with TMS, not later reduced-performance units | — |
|---|
| Configuration limitation | Except for the first unit, all the remaining 8A4 ROUVs have had their TMS removed due to the budget cuts, resulting in a significant reduction in performance, such as reducing the maximum operational depth by more than half[source] | — |
|---|
| Country of origin | China[source] | — |
|---|
| Design basis reported by article | The Chinese 8A4 class ROUV is a remotely operated underwater vehicle (ROUV) used to perform various underwater tasks, ranging from oil platform service to salvage and rescue missions. The 8A4 is a member of a series of related ROUVs developed by the Shenyang Institute of Automation (SIA) in the People's Republic of China (PRC). The predecessor to the 8A4 was the RECON-IV, an improved version of the American RECON-III. The 8A4 itself is an upgraded version of the American AMETEK 2006, and the 7B8 is an improved version of the 8A4.[source] | — |
|---|
| Name | — | ULAQ[source] |
|---|
| Namesake | — | Turkish : ulak for government official envoy[source] |
|---|
| Status | — | Prototype[source] |
|---|
| Builders | — | Ares Shipyard , Meteksan Defense Systems[source] |
|---|
| Operators | — | Turkish Navy , Qatari Emiri Navy[source] |
|---|
| Capacity | — | 2,000 kg (4,400 lb)[source] |
|---|
| Armament | — | 4x Roketsan Cirit , 2x L-UMTAS 4x ATMACA[source] |
|---|
| Reported operators | — |
|
|---|